.

Jumat, 11 Maret 2016

PIGGING TECHNOLOGIES AUTOMATED PIGGING SYSTEMS

PIGGING TECHNOLOGIES AUTOMATED PIGGING SYSTEMSKami dalam bekerja sama dengan perusahaan WeldFit mengkhususkan diri dalam desain , rekayasa , manufaktur dan kualitas pengujian teknologi otomatis pigging dan teknologi pigging tradisional yang dapat dimanfaatkan untuk melakukan empat fungsi pigging terpisah : pemulihan cair, pembersih , batching dan in-line inspeksi . The SureLaunchTM otomatis sistem pigging dan SureTrapTM sistem pigging automatis yang diproduksi dengan cabang outlet ekstrusi memanfaatkan WeldFit ini lebih dari 30 tahun pipa dan Pig dalam pengalaman peluncuran produk.

Kontak
(Budi Muhammad)
PT.ALGA TEKNIK INDONESIA
Email Kontak : budimuhammadwadud@gmail.com
Kontak phone : 085774557493

WeldFit specializes in the design, engineering, manufacturing and quality testing of automated pigging systems that can be utilized to perform four separate pigging functions: liquid recovery, cleaning, batching and in-line inspections. The SureLaunchTM automated pigging system can launch any type of pig individually at pre-set launch intervals through the use of a logic-driven control system and an electrical drive system. The horizontally oriented automatic launcher design is loaded with multiple pigs in one loading operation that allows the launching of a single cleaning pig, batching pig or spherical pig for both liquid and gas pipeline service applications.


KEY FEATURES & BENEFITS:
  • Horizontal design eliminates access platforms and lifting equipment to reduce safety risks, transportation costs and field installation costs
  • The mechanical launch mechanism ensures pig launches in high and low flow conditions
  • The flow-through barrel design of the automated pigging system removes the need to open and close valves for each pig launch, resulting in an increase of the valve operating service-life and a reduction of  maintenance costs, environmental emissions and safety risk exposure
  • The electric drive system can be powered by 115 VAC or 24 VDC Class 1, Division 1 & 2 compliant power to eliminate supply gas, supply gas treatment and emissions
  • Launch system is controlled by drive system that allows any type of pig to be launched to meet operator’s specific pigging requirements
  • Standard automated pig launcher is designed to accommodate up to seven cleaning pigs or length of typical in-line inspection tools
  • Standard receiver is designed to accommodate up to eight cleaning pigs or length of typical in-line inspection tools
  • Primer coated ready for customer desired paint system or painted to customer’s paint specification
  • Quick opening closure standard on all units
  • Designed with the appropriate quantity and size of nozzles for vents, pressure gauges and drains
  • Data Package provided for code compliance
  • Hydrostatic pressure tested in accordance with the applicable codes
  • All units are skid mounted
  • Ethernet/IP address for remote access capabilities
  • Designed to applicable safety design factor
  • Inspected and designed in accordance to the applicable pipeline codes (B31.8, B31.4, B31.3, Sec. VIII Div. 1)

OPTIONS:
  • Semi-automated capabilities without logic-driven controls
  • Semi-automated systems can be equipped with electric drive motor or can be manually operated when electric power is not available
  • Corrosion coupon holders for monitoring internal corrosion rates
  • Pull nozzles for loading in-line inspection tools
  • Overlays of trap components for corrosive service applications
  • Valve packages available upon request
  • In-Field application engineering, project management, training and commissioning services
  • Extruded nozzles eliminate tees and reduce girth welds on the outlets during field installation
SPECIFICATIONS:
  • Sizes: 4” nominal to 42” nominal line pipe
  • Barrel Capacity:
  • Launcher – 7 Cleaning pigs (2D) or length of one ILI tool
  • Receiver – 8 Cleaning pigs (2D) or length of one ILI tool
  • Pressure Rating: ANSI 150#, 300#, 600#, 900# & 1500#
  • Product: Liquid and Gas Service
  • Product Temperature Range: -50° F to 150° F
  • Power Options: 24VDC, 115VAC or 230 VAC
  • HMI: EXOR eTOP507G 7” TFT widescreen
  • CPU – ARM CORTEX-A8 – 600 MHz
  • User Memory – 128 MB Flash
  • Serial – RS-232, RS-485, RS-422
  • Ethernet – Two 1-/100 Mbit with integrated switch
  • USB – Two Host Interfaces
  • Temperature Range: -25° F to 140° F
  • Explosion Proof Rating: Class 1, Div. 2 Haz Loc
  • Environmental Rating: NEMA 4X / IP66

Tidak ada komentar:

Posting Komentar